When I run the flash disk instead of flashing the BIOS I get a page of information about parameters and examples.Why?

we use a variety of flash utilities in order to support all motherboards.
some of these flash utilities do not support all the parameters we use. If
you get a parameter screen then you want to manually flash the BIOS. the
procedure for this is simple. When the batch file exits to an A:\> prompt
then type DIR and press <ENTER>. Note the following information. 1:the
BIOS file the BIOS file will usually begin with 2A, 2Y, 6A, or 6Z there
are others, and end with .bin 2: the flash loader file.the most common
flash loaders are Aflash.exe AwdFlash.exe and Bflash.exe. Then try the
following command line "<<Flashloader>> <<biosfile>>
original.bin /py /sy /cc"